|
|
|
|
|
DIAMOND
WIRES FOR QUARRYING SOFT STONE
|
|
|
|
The
use of J.M.K. International Pvt. Ltd. diamond wires for quarrying means: |
|
 Tailor-made
solutions for any application
|
|
High
standardization
|
|
Complete
system solutions
|
|
|
|
J.M.K.
International offers a wide range of wire designs and specifications,
meeting exactly the customers demand. For
exacting soft and abrasive stone rubber coated and spring assembled wires
are in operation. The use of both sintered and electroplated diamond beads
enlarges the fields of application in a wide extent. Furthermore
the close co-operation with renown machine manufacturers enables J.M.K.
International Pvt. Ltd. to offer a complete system solution for any of
your quarrying needs.
|
|
|
|
DIAMOND
WIRES FOR QUARRYING CALCAREOUS STONE:
|
 |
For
the wide range of marbles and granite worldwide J.M.K. International
Pvt. Ltd. has different options of assembly.
The rubber assembly with 32 beads protects the steel cable very well
and is recommended for materials on which the performance won't
exceed 30m²/lm.
The
standard on calcareous stone is the traditional spring assembly with
various options (26 to 32 beads/lm).
On
sintered beads the standard diameter is 11 mm with 1,5 mm diamond
layer for special applications like low powered machines and
non-abrasive materials. We recommend sintered beads with 10 mm
diameter or electroplated beads.
|
|
|
|
|
|
Rubber
assembly: for abrasive materials with performance up to 30m²/lm
there is the advantage of no repair till the beads are finished. |
|
Spring
assembly: depending on the application, material and power of the
machine, we alter the number of beads from 26 to 32 beads/lm. |
|
|
|
| Specification |
Ø |
Description |
Application |
Average
speed |
Performance |
| MS30 |
11 |
Rubber
+ sintered |
Crystalline
and hard marble |
4-6
m²/h |
20-25
m²/lm |
| MS40 |
11 |
Springs
+ sintered |
Compact
limestone and marble |
10-14
m²/h |
60-80
m²/lm |
| MS50 |
11 |
Springs
+ sintered |
Abrasive
limestone and marble |
10-14
m²/h |
60-80
m²/lm |
| MS81 |
11 |
Springs
+ sintered |
Soft
and very abrasive marble |
8-12
m²/h |
90-120
m²/lm |
| MS40 |
10 |
Springs
+ sintered |
Fast
cut, very compact limestone |
12-16
m²/h |
40-50
m²/lm |
| GS60 |
11 |
Springs
+ sintered |
High
flint content, green marble |
3-5
m²/h |
15-25
m²/lm |
| AZ90/DP0 |
10 |
Springs
+ electro plated |
Compact,
non abrasive limestone |
10-16
m²/h |
35-50
m²/lm |
|
|
|
|
Tools
and sleeves for wire connection
|
| Shape |
Description
/ Applications |
| SPK |
Light
cutting tool |
| SPF |
Light
crimping tool |
| SRV |
Hydraulic
crimping hand-press, HT 45 (without dies) |
| SREV
8 |
Set
of crimping dies for SRV (SV 8, SVI sleeves) |
| SREV
9 |
Set
of crimping dies for SRV (SV 9 sleeves) |
| SV
8 |
8
mm copper sleeves (for end of cuts, old wires) |
| SV
9 |
9
mm copper sleeves (standard) |
| SVI |
Screw-type
connection |
| SVB |
Brazed
connection |
| SAB |
Wire
assembly bench (220 V) |
|
|
|
|
Components
for wire assembling with metal springs
|
| Shape |
Description
/ Applications |
| SMS |
Steel
wire (galvanized) Ø 4,9 mm |
| SMW |
Washers
(spacers) Ø 8 x L3 mm |
| SMW |
Washers
(spacers) Ø 8 x L4 mm |
| SMB |
Bushings
(to crimp) Ø 8 x L6 mm |
| SM12 |
Springs
12 mm |
| SM15 |
Springs
15 mm |
| SM20 |
Springs
20 mm |
| SM25 |
Springs
25 mm |
| SM30 |
Springs
30 mm |
|
|
|
|
|
|
|
DIAMOND
WIRES FOR QUARRYING HARD STONE |
|
DIAMOND
WIRES FOR QUARRYING SOFT STONE |
|
|
|
| |
Copyright
© 2004-2007 CharlieJMK.com |
site
developed by RegisterIndia.com |
